XY-WTH1 Temperature and Humidity Control Digital Display High Precision Dual Output Automatic Constant Temperature and Humidity Control Board

XY-TR01 Temperature and humidity control module high precision digital display word double output automatic constant temperature and humidity control panel
Product adopts industrial-grade , high-precision SHT20 temperature and humidity sensor.

Product Function:Product features are two main types of classification: the functions of temperature and humidity;
Function of temperature are as follows:

1.The automatic identification of work mode:
The system automatically according to the start/stop temperature, identify work mode;
Start temperature stop temperature, cooling mode''.
Start temperature stop temperature, heating mode 'H'.

2.Cooling mode:
When the temperature≥ Start temperature,relay conduction, red led on, refrigeration begin to work;
When the temperature≤ Stoptemperature,relay disconnect, red led off, refrigeration stopto work;

3.Heating mode:
When the temperature≤ Start temperature,relay conduction, red led on, heating begin to work;
When the temperature≥ Stoptemperature,relay disconnect, red led off, heating stopto work;

4.Temperature correction functionOFE(-10.0 ~ 10℃):
The system is working for a long time and may be biased, through this function correction, the actual temperature = measuring temperature + calibration value;

How to set the start/stop temperature:1. In the running interface, Long Press 'TM+' key more than 3 seconds, into the start temperature settings interface, can be modified byTM+ TM-key, to be modified, waiting for 6s automatic exit and save;
2. In the running interface, Long Press 'TM-' key more than 3 seconds, into the stop temperature settings interface, can be modified byTM+ TM-key, to be modified after the , waiting for 6s automatic exit and save;


The humidity function is as follows:

1.The automatic identification of work mode:
The system automatically according to the start/stop humidity, identify work mode;
Start humidity stop humidity, dehumidification mode'D'.
Start humidity stop humidity, humidification mode 'E'.

2.Dehumidification mode:
When the humidity≥ Start humidity,relay conduction, green led on, dehumidification equipmentbegin to work;
When the humidity≤ Stophumidity,relay disconnect, green led off, dehumidificationequipment stopto work;

3.Humidification mode:
When the humidity≤ Start humidity,relay conduction, green led on, humidification equipmentbegin to work;
When the humidity≥ Stophumidity,relay disconnect, green led off, humidification stopto work;

4.Humidification correction functionRH(-10.0 ~ 10%):
The system is working for a long time and may be biased, through this function correction, the actual humidity = measuring humidity + calibration value;

How to set the start/stop humidity:1. In the running interface, Long Press 'RH+' key more than 3 seconds, into the start humiditysettings interface, can be modified byRH + RH -key, to be modified, waiting for 6s automatic exit and save;
2. In the running interface, Long Press 'RH-' key more than 3 seconds, into the stop humiditysettings interface, can be modified byRH+ RH-key, to be modified after the , waiting for 6s automatic exit and save;

Running Interface Description:

Working mode that the current mode ("H/", "E/d") will be synchronized at the front of temperature/humidity, when the setting of temperature/humidity and stop temperature/humidity are completed.
Any relay conduction, the upper-left corner of the interface display "out", if the temperature relay conduction, the flashing display temperature working mode "H/" to show reminders; if the humidity relay conduction, then flashing display humidity working mode "E/d", as a reminder;

features:

1. remote read/set:
Through the UART, set the starting temperature/humidity, stop temperature/humidity, temperature/humidity correction ;
2.temperature/Humidity Real-time reporting:
If the temperature/humidity reporting function is turned on, the product will detect the temperature/humidity and relay status by the 1s interval, and pass the UART to the terminal to facilitate data collection;
3.Relay enabling (by default):
If the relay is disable, the relay remains disconnected;

How to modify the temperature/humidity correction value:

1.1. In the operating interface, double- the 'TM+' key to enter the correction of the set interface, the downward display correction of the type, the upward display of specific values; (OFE:Temperature correction valueRH:Humidity correction value)
2.At this time by a short press 'TM-' key, switch to modify the , through theRH+ RH-key, modify the specific value of the long press short;
3. When the have been modified, double- the 'TM+' key, exit the correction positive setting interface, and save the data;
How to enable/disable relay:In the running interface, Short press 'TM-' key, enable/disablethe temperature relay(ON: enableOFF:disable), back to the running interface, if the temperature relay is disable, the temperature symbol ' ℃ ' flashes to remind.
In the running interface, Short press 'RH-' key, enable/disable the humidity relay (ON:enableOFF:disable), back to the running interface, if the humidity relay is disable, the humidity symbol '% ' flashes, as a reminder.

Serial control(TTL level)
BaudRate:9600bpsData bits:8
stopbits:1
crc:none
Flow control:none

CMDDescriptionstartstart data uploadstopstop data uploadreadRead the param settingT:ONTemperature relay enableT:OFFTemperature relay disableH:ONHumidityrelay enableH:OFFHumidityrelay disableTS:XX.XSet start Temperature
(-20.0~60.0)TP:XX.XSet stop Temperature
(-20.0~60.0)HS:XX.XSet start Humidity
(00.0~100.0):XX.XSet stop Humidity
(00.0~100.0)TC:XX.XSet Temperature Calibration
(-10.0~10.0)HC:XX.XSet HumidityCalibration
(-10.0~10.0)
Temperature and humidity Data upload format Description:

Temperature format: Operating mode (H/), temperature value, temperature relay status;
Humidity Format: Operating mode (E/D), humidity value, humidity relay status;

H,20.5℃,CL:Heating operating mode, the current temperature of 20.5 degrees, temperature relay disconnection state;

D,50.4%,OP:Dehumidification working mode, current humidity 50.4%, humidity relay connection;

Packageincludes:

1 XXY-WTH1Controller


a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a